Preparation at the field
47
Swath discs
The machine is equipped with two swath discs.
Two extra swath disc can be mounted.
»Optional equipment«, see page 68.
Swath disc
adjustment
The position of the swath discs can be adapted for making a small or
wide swath:
> Remove the spring clip (2),
> Place the blade detachment tool in the holder (1).
> Use the blade detachment tool (3) to place the swath disc in the
required position.
> Place back the spring clip (2).
Swath disc settings
Before start working with the machine check if the swath discs are set
in the correct position.
> Check if the distance between the swath disc (1) and the drum skirt
(3) is between 10 and 15 mm
> Check if the distance between the swath disc (1) and the skid
saucer (4) is between 10 and 15 mm.
Set the swath discs (1) if required:
> Loosen the bolts (2).
> Adjust the swath disc (1) by sliding and/or rotating until the
distances B and C are between 10 - 15 mm
> Tighten the bolts (2).
»Torques for bolted connections«, see page 57
2
1
3
2
3 4
1
B
C
