KUHN PZ280F Скачать руководство пользователя страница 21

Страница: 21 / 75

Safety instructions

Unhitching the

machine

Increased risk of injury

An increased risk of injuries occurs when unhitching the machine from
the tractor. Therefore:

•

Prevent the tractor and machine from rolling away.

•

Switch off tractor hydraulics.

•

Switch off electronic systems.

•

Turn off tractor engine and remove the ignition key.

•

Never stay between tractor and machine during unhitching.

•

Take care of a level and secure surface for the machine.

•

Take care of a secured support jack.

•

Place the PTO drive shaft at the support or place it in the chain.

•

Only detach the hydraulic hoses when the hydraulic system at the
tractor and the machine are pressureless.

In case of negligence heavy or deadly injuries can be the
consequence.

Содержание PZ280F












































































Результаты поиска

Содержание PZ280F

Отзывы:

Похожие инструкции для PZ280F

Бренды по названию

Популярные бренды

KUHN PZ280F, Руководство по эксплуатации

Результаты поиска

Содержание PZ280F

Отзывы:

Похожие инструкции для PZ280F

Бренды по названию

Популярные бренды