![background image](http://html1.mh-extra.com/html/kuhn/pz280f/pz280f_operation-manual_2009501043.webp)
Preparation at the field
43
Floating hitch frame
> Unlock and fold down both lateral guards (1).
> Lower the machine with use of the hydraulic cylinder.
> In operating position the height (H) has to rather be 150 cm, but
should be at least 130 cm. (H is the height measured from the top
of the Accord hitch frame to the ground).
> Close the corresponding hydraulic valve at the tractor to lock the
machine in its position and or use the limiting chains of the tractor.
> Unlock the ground adaptation mechanism by tilting lever (1) in
such a position that the lock pin (2) is in its upper position.
> Use the 3-point front hitch to lower the machine.
Cutting height
adjustment
The cutting height can be set by adjusting both outer drums.
Always place the mowing unit horizontal, before adjusting the cutting
height.
> Loosen the lock nut (3) with use of the blade detachment tool (1).
> Turn the bolt (2) clockwise to increase the cutting height (or
counterclockwise to decrease the cutting height).
> Tighten the lock nut (3) with use of the blade detachment tool (1).
1
H
1
2
3
1
2