Preparation for use
37
Crop transport
strips
When mowing long crop, install the crop transport strips (1) on both
outer drums to improve the crop feed-through.
Checklist
> Run the tractor hydraulics at idle.
> Run the machine for 1000 rpm for some minutes (or 740 rpm in
case of the 740 rpm drive set [+]).
> Check the components for operating correctly.
> Check for unusual noises.
> Switch off the tractor hydraulics.
> Switch off the PTO.
> Switch off the tractor engine and remove the ignition key.
> Tighten all bolted connections.
»Torques for bolted connections«, see page 57.
During the running-in period, special maintenance has to be carried
out.
»Maintenance table«, see page 55.
1
