56
Maintenance
Complete machine
Clean the machine always:
•
After operation.
•
At the start of each season.
•
At the end of each season.
•
Before storage.
»Clean and care«, see page 50.
»Parking and storage«, see page 51.
Safety decals
Keep all safety decals clean and legible. In case safety decals are
damaged, perished or lost, order new decals as spare parts and affix
them on the machine.
»Safety decals«, see page 9.
Always clean the machine before checking the safety decals.
»Clean and care«, see page 50.
Check the safety decals:
•
After operation.
•
At the start of each season.
•
At the end of each season.
Bolted
connections
Replace a missing or broken bolt or nut, always by a genuine part.
Standard bolts and nuts may look the same, but can have different
qualities and properties. Non-genuine parts may change the
properties of the machine, and may make the machine unsafe.
Material damages or serious injuries can occur.
Always use a suitable torque wrench to tighten bolts and nuts.
Always check for missing bolts and nuts, install new bolts and nuts if
necessary.
Bolts and nuts
Tighten all bolts and nuts:
•
After the first 5 operating hours.
•
After the first 10 operating hours.
•
Every 150 operating hours.
•
At the start of each new season.
•
After a bolt or nut has been unscrewed.
»Torques for bolted connections«, see page 57.
