70
Troubleshooting
Troubleshooting
General
Before start to resolve problems, always secure the machine and
tractor from rolling away and unintentional operating.
Always observe all safety instructions during maintenance and repair
jobs. See also chapter maintenance.
»Safety instructions«, see page 8.
»Safety«, see page 52.
»Protection measures«, see page 53.
In most cases problems, failures and defects can be solved very quick
and easily. Before contacting a dealer or the service department,
please check if you can solve the problem yourself, using the
information and instructions of this chapter as a guideline.
Always contact your dealer if:
•
The problem, failure or defect cannot be found.
•
The problem, failure or defect cannot be solved.
•
The operator cannot repair the machine.
•
This is mentioned in this operation manual.
Before restarting the tractor and machine in case of any problems,
defects or failures, always:
•
Solve the problem first, in case the problem cannot be solved,
contact your dealer.
•
If possibile, repair or replace defect parts first, otherwise contact
your dealer.
It is not allowed to use a defect machine.
Material damages and serious injuries can occur.
Mowing unit
Problem
Cause
Solution
Page
Machine does not rotate
•
The slip clutch slips
> Decrease the operating
speed
> Remove the blockage
> Check if the clutch is
broken/worn. Repair or
replace if required.
Bad ground adaptation
•
Mowing unit not in correct
operating position
> Place the mowing unit into
operating position.
42
•
Ground pressure adaptation
not correct
> Adjust the ground pressure
adaptation
44
•
Ground adaptation not correct
> Adjust the ground pressure
adaptation
46
