KUHN MERGE MAXX 950 Скачать руководство пользователя страница 28

Страница: 28 / 124

MERGE MAXX 950

4. - Safety

KN233BGB_C

Merger

4.3.2 Description of safety decals



Operating instructions (1)

- The operators' manual contains all the information

necessary for using the machine safely. It is
imperative to read and comply with all instructions.



Working on the machine (2)

- Before leaving the tractor or before adjusting,

maintaining or repairing the machine, disengage
the PTO drive, turn off the engine, remove ignition
key and wait until all moving parts have come to a
complete stop and apply park brake.



Projections (3)

- Stones and other debris projected by the moving

parts can travel a long distance. Always stay at a
safe distance from the machine.



Manoeuvring area (4)

- Stay a safe distance from the machine. Crushing

hazard.

Содержание MERGE MAXX 950





























































































































Результаты поиска

Содержание MERGE MAXX 950

Отзывы:

Похожие инструкции для MERGE MAXX 950

Бренды по названию

Популярные бренды

KUHN MERGE MAXX 950, Руководство оператора

Результаты поиска

Содержание MERGE MAXX 950

Отзывы:

Похожие инструкции для MERGE MAXX 950

Бренды по названию

Популярные бренды