KUHN MERGE MAXX 950, Руководство оператора

Страница: 24 / 124

MERGE MAXX 950
24
4. - Safety
KN233BGB_C
Merger
4.2.16 Waste disposal
- Respect the environment! Never spill pollutants
(oil, grease, filters, etc.) on the ground, never pour
them down the drain and never discard them in any
other place where they could pollute the
environment. Never throw away or burn a tyre.
Always take waste to specialized recycling or
waste disposal centers.
4.2.17 Precautions for maintenance and repair
work
- Before leaving the tractor or before adjusting,
maintaining or repairing the machine, disengage
the PTO drive, turn off the engine, remove ignition
key and wait until all moving parts have come to a
complete stop and apply park brake.
- Rest the machine on the ground, release the
pressure from the hydraulic circuit and leave the
machine to cool down.
- Make sure that the parts of the machine that need
to be lifted for maintenance or repair work are
firmly propped up.
- Before any work is done on the electric circuit or
before any electric welding is carried out on the
attached machine, disconnect the machine from
the tractor electrical circuit. Also disconnect
alternator and battery terminals.
- Repairs on elements under pressure or tension
(springs, pressure accumulators, etc.) must only
be carried out by competent persons with
regulation equipment.
- Wear the appropriate protective clothing for the
work in hand (gloves, shoes, goggles, helmet, ear
defenders, etc.).
- Do not solder, weld or use a blow torch near fluids
under pressure or inflammable products.
- For your own safety and for correct machine
operation, only use original manufacturer parts.
- It is strongly recommended to have your machine
checked by your Kuhn dealer after each season,
especially tools and their attaching hardware (nuts,
bolts, etc.).
- When working at height use appropriate means or
equipment in accordance with local regulations.