KUHN MERGE MAXX 950 Скачать руководство пользователя страница 19

Страница: 19 / 124

4. - Safety

MERGE MAXX 950

KN233BGB_C

Merger

4.2.8 Precautions when coupling

- Before attaching the machine, make sure that it

cannot accidentally start moving (chock the
wheels) and that the parking stand is in the right
position.

- The machine must only be attached to the hitch

points provided for this purpose.

- Do not stand between the machine lower hitching

points or between the tractor lower hitching points
during coupling maneuvers.

- Never stand between the tractor and the machine

when operating the three point linkage.

- Do not stand between the machine and the tractor

or on the machine without having first applied the
tractor parking brake and placed the gearbox in the
neutral position.

Содержание MERGE MAXX 950





























































































































Результаты поиска

Содержание MERGE MAXX 950

Отзывы:

Похожие инструкции для MERGE MAXX 950

Бренды по названию

Популярные бренды

KUHN MERGE MAXX 950, Руководство оператора

Результаты поиска

Содержание MERGE MAXX 950

Отзывы:

Похожие инструкции для MERGE MAXX 950

Бренды по названию

Популярные бренды