KUHN MDS 55, Руководство оператора

Страница: 14 / 81

Erreur ! Style non défini. Erreur ! Style non défini.
12
•
Any pto damage should be repaired immediately before continuing sprea-
ding operations.
•
Do not operate the machine with unguarded pto components. Only start up
the unit when all guards are correctly in place and functioning.
•
Before cleaning the fertiliser spreader with a high pressure water or steam
jet, or any other cleaning material, make sure all openings or areas, that for
safety or operational reasons should not come into contact with water or o-
ther cleaning materials, are sealed off and adequately protected. For e-
xample: electrical elements or exposed bearings. After cleaning, make su-
re any temporary protection covers are removed.
•
After cleaning, check all hydraulic hoses for leaks, loose connections, cuts
and other damage. Any damage should be repaired immediately!
•
Disconnect the current supply before working on any electrical installations.
•
Disconnect tractor battery cables before undertaking any welding operati-
ons on the fertiliser spreader.
Maximum attachment height of the fertiliser spreader
Danger of injury by unintentional contact with the spreading discs.
•
The maximum allowable distance from ground level to the underside of
the frame when the unit is operating in normal spreading mode : must not
exceed 85 cm at point A and 85 cm at point B .
•
The maximum allowable distance from ground level to the underside of
the frame when the unit is operating in late top dressing mode must not
exceed 77 cm at point A and 83 cm at point B .
IMPORTANT
B
(85 cm)
A
(85 cm)
B
(83 cm)
A
(77 cm)
Ground level Ground level
Max. allowable attachment
height in normal spreading
mode Max. allowable attachment
height in late top dressing
mode