- 36 -
39
40
b) HR 5002 DR - S / 6002 DR - S
The blades (K) are installed in their supports (T') using
the brackets (L) and the special lynch pins (M) (fig. 39).
To facilitate the removal of the lynch pins (M), use the
special key (N) supplied with the machine (photo 40).
When changing the blades, the lynch
pins must also be replaced. They
have been specially designed and
tested for this use. Therefore, always
use original parts only.
4)
Check regularly that there are no objects wrapped
around the blade holders (twine, wire, crop
residues...). To avoid wear of bearing housings,
remove any wrapped objects.
