KUHN AXIS 20.1, Руководство оператора

Страница: 145 / 216

Spreading Operation
133
B
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
Metering slide does not open

Metering slides do not move easily. Regularly check
slides, nuts and screws for tight fit and tighten them, if
necessary.

Check tension spring.

The reducing plate on the hose connection of the female
coupler is dirty.
Metering slide opens too slowly

Clean orifice plate.

Replace 0.7 mm orifice plate with a 1.0 mm plate. The
plate is at the hose connection of the female coupler.
Agitator does not operate

Check agitator drive. See 9.8: Checking agitator drive,
page 190 .
Blockage of metering outlets
through: fertiliser clumps, damp
fertiliser, miscellaneous impurities
(leaves, straw, sack residues)

Clear blockages. Proceed as follows:
1. Park tractor, remove ignition key
2. Open metering slides
3. Place collection container underneath
4. Remove spreading discs
5. Clean the outlet from below with a wooden pole or clean
the adjustment lever and push through the metering
opening,
6. Remove foreign objects in hopper
7. Install spreading discs, close metering slides
Fault Possible cause/action