KUHN AXIS 20.1, Руководство оператора

Страница: 13 / 216

Intended use
1
1
AXIS-GENERAL
1 Intended use
The solid fertiliser broadcaster of the AXIS series should only be used in strict ac-
cordance to the specifications given in the instruction manual.
The solid fertiliser broadcaster of the AXIS series are built according to their spec-
ified use, therefore they should be exclusively used for the following purposes:

for conventional agricultural use

for the spreading of dry, granular and crystalline fertilisers, seeds and pest
control agents
Any use beyond these specifications is considered as contrary to the intended
use. The manufacturer is not liable for any damage resulting from misuse. The
operator bears the entire risk.
The intended use also includes compliance with the operating, maintenance and
service conditions according to manufacturer specifications. Only genuine spare
parts from the manufacturer may be used as replacements.
The solid fertiliser broadcaster of the AXIS series should be operated, serviced
and maintained solely by persons who are thoroughly familiar with the machine
and are aware of the hazard.
The instructions regarding the operation, service and safe handling of the ma-
chine as described in this manual and declared by the manufacturer in the form
of warning signs and symbols on the machine, must be strictly followed during op-
eration.
The relevant accident prevention regulations and the other generally recognised
safety, occupational health and road traffic regulations must be strictly observed
when using the machine.
Unauthorised modifications to the solid fertiliser broadcaster of the AXIS series
are not allowed. The manufacturer is not liable for any resulting damage.
Foreseeable misuse
The manufacturer has indicated foreseeable misuse of the solid fertiliser broad-
caster AXIS series by affixing warning signs and symbols on the machine. These
warning signs and symbols must be observed at all times in order to avoid non
intended use of the solid fertiliser broadcaster of the AXIS series as specified in
the operating manual.