KUHN AXIS 20.1, Руководство оператора

Страница: 176 / 216

Maintenance and repair C
164
AXIS-GENERAL
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
C Maintenance and repair
C.1 Safety
Maintenance and repair work involves additional hazards that do not occur during
operation of the machine.
Take particular care when carrying out maintenance and repair work. Work very
carefully and with awareness of danger.

Observe the following instructions in particular:

Welding and work on the electrical and hydraulic systems must be carried out
by qualified technicians only.

When working on the raised solid fertiliser broadcaster always be aware of
the danger of the machine tipping over . Always secure the solid fertiliser
broadcaster with suitable supports.

To lift the solid fertiliser broadcasters with hoisting gear always use both eye-
lets in the hopper.

Power-operated components (adjustment lever, metering slide) may crush
and shear. Make sure that there is no one in close proximity to the movable
parts during maintenance.

Spare parts must at least comply with the technical standards specified by the
manufacturer. This is assured with genuine spare parts.

Before all cleaning, maintenance and repair jobs, and when repairing faults,
turn off the tractor engine and wait until all rotating parts of the machine have
come to a stop.

Always have repairs carried out by an authorised service centre.
NOTICE
Please note the warnings in chapter 3: Safety, page 5 .
Please note in particular the instructions given in section 3.8: Service and
maintenance, page 11 .