KUHN AXIS 20.1, Руководство оператора

Страница: 165 / 216

Spreading operation
153
B
AXIS
20.1
AXIS
20.1
AXIS
30.1 (W), AXIS 40.1 (W)
AXIS 50.1 W
B.5.3 Setting the fertiliser drop point
With the selection of the vane type the operator specifies a particular range for
the working width. Changing the drop point sets the working width and adjusts it
for various types of fertilisers.
The fertiliser drop point is adjusted and set using the electronic control system.

Adjusting in the direction of smaller numbers: the fertiliser is ejected sooner.
This gives scatter patterns for smaller working widths.

Adjusting in the direction of larger numbers: the fertiliser is ejected later and
spread more towards the outside into the overlap zone. This gives spreading
patterns for larger working widths.
Figure 6: Fertiliser drop point gauge
NOTICE
The solid fertiliser broadcaster AXIS 50.1 W is equipped with an electronic drop
point adjustment.
The electronic slide feed actuator adjustment is described in a separate opera-
tor's manual for the electronic control system. This operator's manual is part of
the electronic control system.
n
CAUTION
Risk of material damage through stuck or blocked indica-
tor
The fertiliser drop point is adjusted and set using the electric
controls. If the indicator sticks, the electrical adjusting cylin-
ders can be damaged.
 Never push the indicator forwards or block it.