Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 90 / 436

(1) Bolt
Tightening torques
Front
149.2 N ⋅ m to 179.0 N ⋅ m
(15.2 kgf
⋅
m to 18.3 kgf
⋅
m)
[110 lbf ⋅ ft to 132 lbf ⋅ ft]
Rear
108.5 N ⋅ m to 130.2 N ⋅ m
(11.1 kgf
⋅
m to 13.3 kgf
⋅
m)
[80 lbf
⋅
ft to 96 lbf
⋅
ft]
2. Then recheck as the following table.
Timing to recheck
the bolts
After driving the tractor 200 m (200 yards),
after 1 day (8 hours), and thereafter every
50 hours
NOTE
• Use the tapered bolts for wheels with beveled or
tapered holes.
2.1 Front wheels
IMPORTANT
• Do not turn the front discs to obtain wider tread.
• Always attach the front wheels as shown in the
following table.
If you do not attach the front wheels as
illustrated in the table, transmission parts may
be damaged.
You cannot adjust width of the front tread.
Models BX1880 BX2380 and BX2680
Tire
16×7.50-8 Turf,
16×7.50-8 Bar
18×8.50-10 Turf,
18×8.50-10 Bar,
18×8.50-10 Ind.
Tread
(A)
930 mm (36.6 in.)
How to jack up the front axle
WARNING
To avoid serious injury or death:
• Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
• Fix the front axle to keep it from pivoting.
• Select jacks that withstand the machine weight
and set them up at jack point (2).
(1) Front axle case (2) Jack point
2.2 Rear wheels
IMPORTANT
• Do not turn the rear discs to obtain wider tread.
• Always attach the rear wheels as shown in the
following table.
If you do not attach the rear wheels as
illustrated in the table, transmission parts may
be damaged.
You cannot adjust width of the rear tread.
2. GENERAL
TIRES, WHEELS, AND BALLAST
2. Wheel tread
2-48
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A