Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 64 / 436

2. Detach the radiator screen, and then remove all the
foreign material.
NOTE
• If the dust or chaff is accumulated in the
battery compartment, open the panel and
clean completely.
(1) Panel
(2) Knob
(3) Center pillar (4) Radiator screen
(A) Detach
1.2.7 Checking brake pedal
1. Inspect the brake pedal for free travel, and smooth
operation.
2. Adjust the brake pedal if incorrect measurement is
found.
1.2.8 Checking gauges, meters, and Easy
Checker
™
1. Inspect the instrument panel for broken gauge(s),
meter(s) and Easy Checker
™
lamps.
2. Replace the gauge(s), the meter(s), or the Easy
Checker
™
if they are broken.
1.2.9 Checking head light, hazard light, and
tail light
1. Inspect the lights for broken bulbs and lenses.
2. Replace the lights if they are broken.
1.2.10 Checking seat belt and ROPS
1. Always check condition of the seat belt and the
ROPS attaching hardware before operating the
tractor.
2. Replace the seat belt or the ROPS if it is damaged.
1.2.11 Checking and cleaning electrical
wiring and battery cables
WARNING
To avoid serious injury or death:
• A loosened terminal or connector, or damaged
wire may affect the performance of the electrical
components or cause short circuits. Leakage of
electricity could result in a fire hazard, a dead
battery,
or damage to the electrical
components.
• Replace the damaged wires or connections
promptly.
• If a fuse blows soon after replacement, do not
use the capacity larger than recommended or
bypass the fuse system.
• Many wiring connections are protected by
waterproof plugs. Plug and unplug these
connections carefully and make sure that they
are sealed correctly after assembly.
• Accumulation of dust, chaff, and deposits of
spilled fuel around the battery, electrical wiring,
engine, or exhaust system may cause fire
hazards.
Clean around the battery, electrical wiring,
engine or exhaust system before starting to
work.
• To avoid premature electrical malfunctions, do
not apply high pressure water directly to the
battery, the wiring, the connectors, the electrical
components, or the instrument panel.
• Inspect the following check items regularly.
– Check the wiring for chafed or cracked
insulation.
– Check the wiring harness clamps. Replace
them if necessary.
– Check the connectors and the terminals for
looseness, contamination, or overheated or
discolored connections.
– Check the instrument panel for correct
operation of the switches and the gauges.
2. GENERAL
CHECK AND MAINTENANCE
1. Periodic service
2-22
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A