Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 412 / 436

5.5 Setting tractor
1. Make sure that the frame link (1) is lifted up to the
TOP position when tractor is traveling without
mower. Stop the tractor behind the mower. Set the
parking brake.
(1) Frame link
2. Set the cutting height to 0" and lower the frame link
(1). Then stop the engine.
3. Make sure that the rear lock (2) is unlocked.
(2) Rear lock
(A) NG (B) OK
4. Make sure that the universal joint (3) is in rear
position.
(3) Lever guide (Universal joint)
(A) NG (B) OK
5. Make sure that the frame link (1) is fully down.
5.6 Mounting mower
WARNING
To avoid serious injury:
• If mower moves forward before the tractor rides
on, there is less grip between the ground and
mower. Change area and try again.
1. Start the engine and engage 4WD. Set the range
gear shift lever to LOW . Release the parking brake.
2. With the right front tire, make a driving target to the
guide (1).
(1) Guide
3. Drive over the ramp of mower along the guide (1).
Keep the front tire side touching the guide rod.
4. Just after the tractor drove over the mower, stop the
engine. Make sure frame link is connected to
mower. Set the parking brake.
5. Lock the rear lock (2).
WARNING
To avoid serious injury:
• Double check that frame link is locked to
mower deck.
(2) Rear lock (B) OK
SERVICING
5. Setting up mower [RCK54D-26BX and RCK60D-26BX] 9. MOWER
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
9-13
KiSC issued 03, 2019 A