Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 65 / 436

1.2.12 Checking movable parts
1. If any of the movable parts, such as levers and
pedals, is not smoothly moved because of rust or
sticky material, remove the rust or the sticky
material, and apply oil or grease on the relevant
spot.
Do not force the movable parts into motion.
Otherwise, the machine may get damaged.
1.3 Check points of initial 50 hours
1.3.1 Changing engine oil
WARNING
To avoid serious injury or death:
• Be sure to stop the engine and remove the key
before changing the oil.
• Oil can be hot and can burn. Allow the engine to
cool down sufficiently.
BX1880
Engine oil with fil-
ter
Capacity
3.0 L
3.2 U.S.qts
BX2380
Engine oil with fil-
ter
Capacity
3.3 L
3.5 U.S.qts
BX2680
Engine oil with fil-
ter
Capacity
4.0 L
4.2 U.S.qts
1. To drain the used engine oil, remove the drain plug
at the bottom of the engine, and drain the engine oil
completely into the oil pan.
2. After draining of the used engine oil, reinstall the
drain plug.
3. Fill the engine with the new engine oil up to the
upper notch on the dipstick.
4. Properly dispose of the used engine oil.
BX1880 and BX2380
BX2680
BX1880, BX2380, and BX2680
(1) Oil inlet
(2) Dipstick
(3) Drain plug (A) Oil level is acceptable within
this range.
RELATED PAGE
1.1 Lubricants, fuel, and coolant on page 2-7
1.3.2 Replacing engine oil filter
WARNING
To avoid serious injury or death:
• Be sure to stop the engine before replacing the
oil filter cartridge.
• Oil can be hot and can burn. Allow the engine to
cool down sufficiently.
IMPORTANT
• To prevent serious damage to the engine, use
only a KUBOTA genuine filter.
1. Remove the oil filter.
2. Put a film of the clean engine oil on the rubber seal
of the new filter.
3. Tighten the filter quickly until it contacts the
mounting surface.
CHECK AND MAINTENANCE
1. Periodic service 2. GENERAL
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
2-23
KiSC issued 03, 2019 A