Kubota G23, Руководство по ремонту

Страница: 52 / 343

GENERAL
G23, G26, WSM
G-34 (EU)
Checking Battery Charging
DANGER
To avoid serious injury or death :
• When the battery is being activated, hydrogen and oxygen
gases in the battery are extremely explosive. Keep open
sparks and flames away from the battery at all times,
especially when charging the battery.
CAUTION
To avoid personal injury :
• When charging battery, ensure that the vent caps are
securely in place (if equipped).
• When disconnecting the cables from the battery, start with
the negative terminal first.
When connecting the cables to the battery, start with the
positive terminal first.
• Never check battery charge by placing a metal object
across the posts.
Use a voltmeter or hydrometer.
(For accessible maintainable type batteries with removable vent
caps.)
1. Make sure each electrolyte level is at the bottom of vent wells,
if necessary add distilled water in a well-ventilated area.
2. The water in the electrolyte (3) evaporates during recharging.
Liquid shortage damages the battery. Excessive liquid spills
over and damages the machine body.
3. To slow charge the battery, connect the battery positive terminal
to the charger positive terminal and the negative to the negative,
then recharge in the standard fashion.
4. A boost charge is only for emergencies. It will partially charge
the battery at a higher rate and in a short time. When using a
boost-charged battery, it is necessary to recharge the battery as
soon as possible.
Failure to do this will shorten the battery's service life.
5. When the specific gravity of electrolyte reaches 1.27 to 1.29
charge has completed.
6. When exchanging an old battery with new one, use a battery of
equal specification shown in "SPECIFICATIONS".
(To be continued)
(1) Vent Well
(2) Separator
(3) Electrolyte
A : Highest Level
B : Lowest Level
KiSC issued 08, 2009 A