KTR-STOP
®
XS-A-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
445118 EN
9 of 23
1
Please observe protection
note ISO 16016.
Drawn:
2020-12-03 Shg/Mro
Replacing:
---
Verified:
2020-12-03 Shg
Replaced by:
Subassembly 4: Centering system
Subassembly 5: Pad retraction set for housing
Compo-
nent
Quantity
Description
Compo-
nent
Quantity
Description
4.1
1
Pin
5.1
1
Cap screw DIN EN ISO 4762
4.2
1
Pressure spring
5.2
1
Pressure spring
4.3
5
Hexagon nut
DIN EN ISO 4032
5.3
1
Washer
4.4
1
Washer
5.4
1
Bush
Illustration 7: Centering system
Illustration 8: Pad retraction
set for housing
To ensure the full braking power, the preparation for assembly needs to be carefully per-
formed.
•
The connection plate for the brake as well as the brake disk have to be inspected for dimensional accuracy.
For that purpose investigate the connection dimensions, connection surfaces and tolerances as specified in
the drawing (see illustrations 1 to 3 and table 3).
•
Clean and degrease the brake disk and mounting surfaces. Dirt can easily be removed by means of solvents.
The connection between connection plate and brake is defined as frictionally engaged. Any
residues of oil, dirt and corrosion protection reduce the coefficient of friction. As a result
the operation of the brake and the full braking power are no longer ensured.
!
Ple
ase observe the manufacturer’s instructions regarding the use of solvents.
4
Assembly
4.1 Components of the brake
4.2 Preparation of assembly
