KTR-Group KTR-STOP XS-A-F B Series, Инструкция по эксплуатации и сборке

Страница: 2 / 23

KTR-STOP
®
XS-A-F B-xx
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 445118 EN
2 of 23
1
Please observe protection
note ISO 16016.
Drawn: 2020-12-03 Shg/Mro Replacing: ---
Verified: 2020-12-03 Shg Replaced by:
The KTR brake system was designed to operate as a service brake/emergency stop brake on rotating
brake disks. For any other applications please consult with KTR.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 5
2.4 Intended use 5
3 Storage, transport and packaging 6
3.1 Storage 6
3.2 Transport and packaging 6
4 Assembly 7
4.1 Components of the brake 7
4.2 Preparation of assembly 9
4.3 Brake pads 10
4.4 Assembly of the brake 10
4.5 Setting/resetting of the centering system 12
4.6 Pressure port of a brake 13
4.7 Pressure port of several brakes 14
4.8 Start-up of the brake 15
4.9 Recommendation of liquids to be used 16
4.10 Disassembly of the brake 17
4.11 Spares inventory, customer service addresses 17
4.12 Disposal 17
5 Maintenance 18
5.1 Replacement of brake pads 18
5.2 Maintenance of the brake / replacement of single parts 19
5.3 Maintenance and service 21
6 Accessories - Sensor 22
6.1
Technical data „Pre-/end wear sensor”
22
6.2 Assembly / start-up 23
Table of contents