KTM 450 SMR 2021, Руководство пользователя

Страница: 23 / 139

PREPARING FOR USE 7
21
–
Adjust the basic position of the foot brake lever. ( p. 78)
–
Adjust the basic position of the shift lever. ( p. 104)
–
Get used to the handling characteristic of the motorcycle on suitable terrain before undertaking a more chal-
lenging ride.
Info
This vehicle is not approved for use on public roads.
–
Also, ride as slowly as possible and in a standing position to get a better feel for the motorcycle.
–
Do not make any trips that exceed your personal ability and experience.
–
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
–
Do not carry the luggage.
–
Do not exceed the maximum permissible weight and maximum permissible axle loads.
Guideline
Maximum permissible overall weight 335 kg (739 lb.)
Maximum permissible front axle load 145 kg (320 lb.)
Maximum permissible rear axle load 190 kg (419 lb.)
–
Run in the engine. ( p. 21)
7.2 Running in the engine
–
During the running-in phase, do not exceed the specified engine speed and engine performance.
Guideline
Maximum engine speed
During the first operating hour 7,000 rpm
Maximum engine performance
During the first 3 operating hours
≤
75 %
–
Avoid fully opening the throttle!
7.3 Starting power of lithium-ion batteries at low temperatures
402555-01
Lithium-ion batteries are far lighter than lead batteries, have a low
self-discharge rate, and have more starting power at temperatures
over 15 °C (60 °F). At low temperatures, however, the starting
power of lithium-ion batteries drops to below that of lead batter-
ies.
Multiple starting attempts may be needed. Press the start button
for 5 seconds, and wait 30 seconds between attempts. The pauses
are necessary so that the heat created can distribute through the
lithium-ion battery and the lithium-ion battery is not damaged.
If the charged lithium-ion battery is unable to actuate the starter
motor when temperatures are below 15 °C (60 °F), the battery is
not faulty, but needs to be warmed up internally to increase its
starting power (current output).
The starting power increases as the battery warms up.