KTM 450 SMR 2021, Руководство пользователя

Страница: 110 / 139

17 SERVICE WORK ON THE ENGINE
108
K01072-10
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, oil
screen M20x1.5 15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
1
with the magnet and a
new seal ring.
Guideline
Oil drain plug with
magnet M12x1.5 20 Nm (14.8 lbf ft)
E01974-10
–
Remove screws
5
. Remove the oil filter cover with the O-ring.
E01975-10
–
Pull oil filter
6
out of the oil filter housing.
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
E01974-11
–
Lay the motorcycle on its side and fill the oil filter housing to
about
⅓
full with engine oil.
–
Place the new oil filter into the housing.
–
Lubricate the O-ring of the oil filter cover and mount it with oil
filter cover
7 .
–
Mount and tighten screws
5
.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
401955-12
–
Remove filler plug
8
with the O-ring, and fill up with engine
oil.
Engine oil 1.20 l
(1.27 qt.) Engine oil
(SAE 10W/50)
(
p. 126)
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.