kruss DSA100, Инструкция по установке и эксплуатации

Страница: 109 / 115

Appendix page 107
Setting the boards
’
addresses
The first module to be plugged receives the address 4, the second and third the
addresses 5 and 6 in ascending order.
 Turn the screw with the help of a screw driver so that the slit points to the
required number.
Port assignment for multi-dosing units DS3222-3228
Both the syringe revolver and the syringes drivers are connected to the electronic
module(s):

The connections of the syringe revolver always occupy ports 1 and 2 of the first
electronic module (address 4).

The syringe drivers occupy the further ports in a special order that depends on
the number of drivers. The plugs coming from the syringe drives are marked
with 1 to 4 dots. The left syringe driver unit is assigned to syringe numbers 1-4,
the right-hand side unit to numbers 5-8.
Vc)
Mounting
Safety instructions
Switch off and unplug the DSA100 before starting with the installation.

Damage by electrostatic charge
Touching the electronic module when the body is charged electrostatically can
damage electronic components.

Before touching the electronics board discharge yourself, for example by
touching a metallic part of the panel.