Krone 5XL-R/GL, Оригинальная инструкция по эксплуатации, Страница: 43 / 154

IV - 1
Control Unit
4.1 General Description
The electronic equipment of the machine consists
essentially of the job computer (1), the electronics for
the hydraulic axle suspension (2) (optional) along with
the control unit (3) and the control and function
elements.
The job computer (1) and the electronics for the
hydraulic axle suspension (2) (optional) are located
under the front cover on the left front of the machine.
Their functions are:
– Control of the loading and unloading process
– Wagonload counter
– Control of the actuators installed on the machine
– Transfer of alarm messages
– Sensor/actuator diagnostics
The control unit (3) communicates information to the
driver and performs settings to operate the dosing
carriage. This information is received and further
processed by the job computer.
The control unit (3) must be protected
from water.
If the machine will not be used for an
extended period (as in winter, for
example), the control unit (3) must be
stored in a dry place.
For mounting and repair jobs,especially
for welding jobs on the machine,
disconnect the power supply from the
control unit (3).
Overvoltage can damage the electronics
of the control unit.
L400461
1
2
ZX000002
3
4 Comfort Control Unit