Krone 5XL-R/GL, Оригинальная инструкция по эксплуатации, Страница: 26 / 154

III - 2
Operation
KLW08131
1
3.3 Hitching up to the tractor
No persons are permitted inside the
danger area.
The short-cut loading wagon must be adjusted to
the tractor currently being used (see Appendix A
“Inital hitch up“)
3.3.1 Couple the towing eye of the trailer to
the tractor hitch.
When hitching up the wagon, proceed as follows:
• Connect the electrical and hydraulic connections
(see 3.4.1 / 3.4.2) and start up.
• If necessary, adjust the height of the trailer coupling
to the tractor hitch using the "articulated tow-bar UP/
DOWN" function on the electrical control box.
• Hitch up the towing eye.
• Slightly raise the articulated tow-bar in order to
relieve the stabilising foot (1).
• Retract the stabilising foot (1) and secure.
Abide by the maximum permitted support and trailer loads.
Attach the short-cut loading wagon to the trailer hitch in accordance with the stipulations
and secure it.
Towing eye in accordance with
DIN 11026. Trailers are only
allowed to be attached to the
back of tractors with trailer
couplings designed for the
purpose (only applies to
compressed air brakes). Towing
height - see Page A - 2
• Arrange the cable connections between the tractor and the short-cut loading wagon so
that they are not under tension when the vehicles are turning or when the tow bar is being
used and so that they do not come into contact with the wheels of the tractor.