Kromschroder E8.5064 V1, Руководство по эксплуатации

Страница: 59 / 64

Part 4:Appendix
Remote controls
59
Part 4:Appendix
Remote controls
Operation-control module Merlin BM, BM 8, Lago FB
(Only for controller models with CAN-Bus connection)
Electrical connection: Connector IX; 1-4
The controller permits connection of an operation-control
module BM for each heating circuit via a bus line. The
operation-control module allows various operation-control
functions and monitoring functions for the system values to
be relocated to the main controlled zone – i.e. the living
room. This achieves maximum comfort and convenience.
Please refer to the technical description of the BM for a
precise description of the overall scope of functions.
•
Display of the system parameters
•
Entry of the heating circuit parameters
•
Room temperature control
•
Automatic adaptation of the heat slope (not Lago FB)
Remote control FBR2
Connection for HC1: Connector I; (2+collective 3)
Connection for HC2: Connector III; (1-3)
•
Rotating switch for modifying room temperature setting
Adjusting range: (±5 K)
•
Room control via the integrated room sensor
•
Rotating switch for selecting operating mode
i Standby/OFF (frost protection only)
q
1
Automatic mode (according to timer program 1 in
controller)
q
2
Automatic mode (according to timer program 2 in
controller)
C 24-hour night operation (reduction temperature)
B 24-hour daytime operation (comfort temperature)
F
Summer mode (heating OFF, hot water only)
!
The operating mode at the controller must be set
to
q
.
The controller can also be operated with an FBR1.
1
2
Re set