Kromschroder E8.5064 V1, Руководство по эксплуатации

Страница: 23 / 64

Part 2: Overview of display values and settings
User Area
23
~
Hinged cover OPEN Î search for level to the right with
Ç
,
open with
Ä
User Area
All the settings that can be made by the operator of the
system.
INSTALLATION
All settings that cannot be assigned to a consumer circuit
(consumer circuits: heating circuits and HW).
Ä
Select value,
Ç
adjust and
Ä
save
Designation Value range Default IV*)
GERMAN Acc. to version GERMAN
CONTRAST (-20) – (20) 00
DISPLAY SEL Sensor, weekday, ... - - - -
SELECT
PROG Heating circuit 01,
Heating circuit 02 01
RETURN
Exit level using
Ä
*) IV = Internal Values:
Space for entering the parameters stored in the system!
* ) only with remote control connected
**) only if corresponding configuration applies
GERMAN => Language
Select controller language
CONTRAST
Adjust intensity of display
DISPLAY SEL
Select additional display in standard operation
- - - -
=> no additional display
WEEKDAY => Day of week (Mo, Tu, We, ....)
T-OUTSIDE => Outside temperature
T-FLOW
D
1 => Flow temperature,
heating circuit 1
T-FLOW
D
2 => Flow temperature,
heating circuit 2
T-DHW => Hot water temperature (upper)
T-HS => Heat generator temp
T-ROOM
D
1 => Room temperature,
heating circuit 1=> *)
T-ROOM
D
2 => Room temperature 2=> *)
T-SOL PANEL 1 => Collector 1 temperature => **)
SELECT PROG
Select heating circuit whose heating program is shown in
the standard display.