Kramer PA-120Z, Руководство пользователя

Страница: 42 / 50

Kramer Electronics Ltd.
PA-240Z - Protocol 3000 40
AUD-MONO-MODE
Functions Permission Transparency
Set:
AUD-MONO-MODE
End User Public
Get
AUD-MONO-MODE?
End User Public
Description Syntax
Set:
Set output select state when audio in HI-Z mode only
# AUD-MONO-MODE SPMonoModeCR
Get:
Get output select state when audio in HI-Z mode only
# AUD-MONO-MODE? CR
Response
~nn@ AUD-MONO-MODE SPMonoModeCR LF
Parameters
MonoMode
– The mono output mode:
0
(output is ”stereo mix to mono” – both left and right mix to one
channel),
1
(output is “left to mono” – duplicate left channel information to the right and play both)
Notes
These commands are active only when the state is HI-Z, otherwise an error is returned.
To set, the
MonoMode
parameter must be used.
K-Config Example
Set the output to mix to mono:
“#AUD-MONO-MODE 0”,0x0D
AUD-SIGNAL
Functions Permission Transparency
Set: - - -
Get
AUD-SIGNAL?
End User Public
Description Syntax
Set: - -
Get: Get audio input signal status
# AUD-SIGNAL? SPinp_idCR
Response
~nn@ AUD-SIGNAL SPinp_id,statusCR LF
Parameters
Inp_id
– input number:
1
(Input 1),
2
(Input 2)
status
–
0
(OFF, no signal),
1
(ON, signal present)
Response Triggers
After execution, response is sent to the com port from which the Get was received
Response is sent to all com ports if audio status state was changed on any input
K-Config Example
get the status of input 1:
“#AUD-SIGNAL? 1”,0x0D