Kramer Electronics Ltd.
PA-240Z - Protocol 3000
29
Protocol 3000
The
PA-240Z
240W Power Amplifier
can be operated using the Kramer Protocol 3000 serial
commands. The command framing varies according to how you interface with the
PA-240Z
.
Generally, a basic video input switching command that routes a layer 1 video signal to HDMI
out 1 from HDMI input 2 (
ROUTE 1,1,2
), is entered as follows:
Terminal communication software, such as Hercules:
The framing of the command varies according to the terminal communication software.
.
K-Touch Builder (Kramer software):
K-Config (Kramer configuration software):
All the examples provided in this section are based on using the K-Config software.
You can enter commands directly using terminal communication software (e.g., Hercules) by
connecting a PC to the serial or Ethernet port, depending on your device. To enter
CR
press
the Enter key (
LF
is also sent but is ignored by the command parser).
Commands sent from various non-Kramer controllers (e.g., Crestron) may require special
coding for some characters (such as,
/X##
). For more information, re
fer to your controller’s
documentation.
