Kramer PA-120Z, Руководство пользователя

Страница: 38 / 50

Kramer Electronics Ltd.
PA-240Z - Protocol 3000 36
Audio Commands
Command Description
AUD-CH-LINK
Set/get link between speaker configuration and line level output state
AUD-CLIP?
Get clipping status
AUD-FILTER
Set/get filter/state
AUD-HI-Z
Get High Z status
AUD-IN-CONF
Set/get threshold and time
AUD-LVL
Set/get audio level in specific amplifier stage
AUD-MIX
Set/get mixer level
AUD-MONO-MODE
Set/get output select state when audio in HI-Z mode only
AUD-SIGNAL?
Get audio input signal status
AUD-STANDBY
Set/get standby mode/state
BALANCE
Set/get balance level
EQ-FREQ
Set/get equalizer center
EQ-LVL
Set/get equalization level
EQ-Q
Set/get Q level
MUTE
Set/get audio mute
AUD-CH-LINK
Functions Permission Transparency
Set:
AUD-CH-LINK
End User Public
Get
AUD-CH-LINK?
End User Public
Description Syntax
Set:
Set link between speaker
configuration and line level output
# AUD-CH-LINK SPCh1,Ch2,LinkStateCR
Get:
Get the configuration link state
# AUD-CH-LINK? SPCh1CR
Response
~nn@ AUD-CH-LINK SPCh1,Ch2,LinkStateCR LF
Parameters
Ch1
–
1
(Speaker Output)
Ch2
–
2
(Line Level Output)
LinkState
–
1
(enable),
0
(disable)
Notes
Response if no link
–
AUD-CH-LINK 1
,
1
,
0
Response if link
–
AUD-CH-LINK 1
,
2
,
1
K-Config Example
Set a link between the speaker output configuration and the line level output configuration:
“#AUD-CH-LINK 1
,
2
,
1”,0x0D