Kramer Electronics Ltd.
PA-240Z - Using the Embedded Web Pages
19
Setting Device Parameters
The Device Settings Web page shows the device details, such as name, MAC address and
firmware version and also enables performing the following functions:
Changing the name of the unit by typing the name in the
Unit name
text box.
Changing the Ethernet Settings
on page
19
.
Saving and Loading Settings
on page
20
.
Performing a Factory Reset
on page
21
.
Changing the Ethernet Settings
To change the Ethernet settings, if required:
1. In the Navigation pane, click
Device Settings
. The Device Settings page appears:
Figure 18: Device Settings Page
2. Set
DHCP
to
ON
or
OFF
.
3. If DHCP is set to
OFF
, change any of the parameters (IP Address, Netmask and/or
Gateway).