35
The remote control has six (6) flame levels, displayed by steps as shown in
Figure 15.3. Each press of the UP / DOWN Arrow Key will increase or decrease
the flame level by one step. A single ‘beep’ will confirm reception of the
command.
1. With system
ON
and the flame level at maximum, press the
down arrow key
once to reduce flame height by one step until flame is turned off.
2. Press the
up arrow key
once
to increase flame height by one step. If the up
arrow key is pressed while the control system is on but the flame is off, the
flame will come on in ‘HI’ position.
When SMART Thermostat is activated, manual flame height adjustment is
disabled.
15.6
Control Flame Manually with Remote Control
Figure 15.3, Flame Levels
The SMART Thermostat function adjusts the flame height based on the set
temperature and the actual room temperature. As the room temperature gets
closer to the set point, the smart function will automatically adjust the flame
down. To activate this function,
1. Press the
thermostat key
until the word ‘SMART’ appears on the right side
of the temperature bulb graphic.
2. To adjust set temperature, press the
up
or
down
arrow keys
until THE
desired set temperature is displayed on the LCD screen.
The remote control can operate as a room thermostat. The thermostat can be
set to a desired temperature to control a room’s comfort level. To activate this
function,
1. Press the
thermostat key
. The LCD display will change to show the room
thermostat is
ON
, and will display the set temperature.
2. To adjust the set temperature, press the
up
or
down arrow keys
until the
desired set temperature is displayed on the LCD screen.
15.7
Remote Control Thermostat Operation
15.7.1
Room Thermostat
15.7.2
Smart Thermostat
Figure 15.4a, Room Thermostat Operation
Figure 15.4b, Smart Thermostat Operation
15.7.3
Deactivate Thermostat Operation
The remote control thermostat options (room and smart functions) can be
disabled by deactivating thermostat operation. When the thermostat operation
is deactivated, the remote control will still be able to operate the burner ON/
OFF, and be able to function flame, fan, and light modulation. To deactivate
this function,
1. Verify all (3) AAA type batteries are installed in the remote control.
2. Remove one AAA battery.
3. While re-inserting the AAA battery, push and hold down the
thermostat
key
. The thermostat icon will not appear on the remote control LCD
screen.
To re-activate thermostat operation, follow the same button sequence
procedure described above. The thermostat icon will reappear on the remote
control LCD screen.
Figure 15.4c, Deactivated / Activated Thermostat
