KOZI
D
IRECT
V
ENT
G
AS
S
TOVE
9
LOCATING YOUR
KOZI
GAS STOVE
All clearances listed below and within the following section must be satisfied when selecting
a location for your appliance. Maintaining these clearances will ensure that there will be
adequate access for servicing and regular maintenance.
This unit has been approved for the following locations in your dwelling:
A. Angled Across Corner
B. Flush Against Wall And Alcove
C. Flat Against Wall And Corner
D. Flat Against Wall
E. Island Installation
F. Dividing Room
G. Two Elbow Venting
Figure: 3 - Various Approved Installation Configurations
CLEARANCES TO COMBUSTIBLE SURFACES
The list of clearances provided are MINIMUM distances only. Measure the clearance area
to both the appliance and the chimney connector. The greater measurement is correct if the
two clearances do not coincide.
For example, if the unit is situated as indicated in Fig. 3 but the connector is too close,
move the unit until the correct clearance is achieved.
This appliance may only be installed with the clearances provided as shown in Figs. 3 & 4.
DO NOT combine clearances from one type of installation with another to achieve closer
clearances.
