KOZI
D
IRECT
V
ENT
G
AS
S
TOVE
26
OPERATING INSTRUCTIONS
Prior to the initial ignition of this appliance, go through the following checklist.
1. Review and comprehend the following set of instructions before
operating this appliance.
2. Ensure that all wiring is safe and enclosed to prevent the
possibility of electrical shock.
3. Check and insure that there are no gas leaks.
4. Insure that the glass and door are properly fastened in the
appropriate location. Never operate this appliance with the door
open, removed or with damaged glass.
5. Examine all venting and terminal for obstructions.
6. Verify log positioning.
7. Never turn this unit on and off without a 60 second delay
between operations.
LIGHTING PROCEDURE
1. Open control compartment door to gain access to the gas valve. Inspect
and insure that the burner switch is in the OFF position before
proceeding any further.
2. Check the position of the control knob. If it is found in the OFF position,
proceed to step 4.
3. Rotate control knob clockwise to the OFF position.
4. Inspect the unit after allowing it to sit for five minutes prior to lighting. If
you smell gas, follow the instructions located under the heading
What To
Do If You Smell Gas.
If you do not detect the presence of gas, follow
through with the remaining instructions.
5. Rotate the control knob to the PILOT position.
6. Depress the control entirely and hold this position while pressing the red
igniter button until the pilot lights. Once the pilot flame is detected,
continue to maintain the depressed position for approximately one-
minute, and then release it. The pilot flame should continue to burn. If
IMPORTANT
The Gas Valve Installed On This Unit Is Equipped With A Seated Cock Valve
And Will Not Turn From Pilot To Off Without Being Depressed.
