KOZI
D
IRECT
V
ENT
G
AS
S
TOVE
11
Note:
The location of the termination cap must satisfy the requirements set forth by the
Exterior Vent Terminal Locations found in Fig. 3, on the next page.
INSTALLATION PRECAUTIONS:
The Simpson Dura-Vent Direct Vent System is an engineered product that has been
Designed and thoroughly tested for use with the
KOZI
DV1.
The Simpson Dura-Vent
warranty will be voided and serious fire, health and safety hazards may result from any of
the following situations:
1.
The utilization of any damaged Direct Vent component.
2.
Unauthorized modification or alteration of any kind to the
Direct Vent System.
3. Unauthorized
installation
of any Direct Vent System
components not manufactured or approved by Simpson
Dura-Vent and or APR Industries Ltd.
4.
Installation other than as instructed in this manual or by
Simpson Dura-Vent.
IMPORTANT:
Carefully Read All Instructions To Completion Prior To Installation. Failure To
Follow These Instructions May Result In Safety Hazards, As Well As Voiding
The Warranty. Ensure That All Venting And Clearances To Combustible
Requirements Have Been Satisfied. Consult Your Local Building Codes
Before You Begin The Installation.
WARNING
Always maintain required clearances to nearby combustibles to aid in the
prevention of fire and safety hazards. Do not fill air spaces with insulation or any
other combustible material.
The minimum clearance requirements between the outer wall of the vent pipe
and nearby combustible surfaces is 1¼”. Ensure that the vent terminal clearance
requirements from decks, windows, soffits, gas regulators, air supply inlets and
public walkways have been satisfied completely. The diagram on the following
page, Fig. 5, demonstrates these clearance requirements, or alternately refer to
your local building codes.
