KOZI
D
IRECT
V
ENT
G
AS
S
TOVE
23
LOG INSTALLATION AND PLACEMENT
1. Carefully remove the logset from its protective packaging.
This
logset is extremely fragile, Handle With Care. Do Not Force
into position.
2. Gently place the rear of the logset on the burner stand. Slide
the log towards the back of the burner until the bottom rear
corner of the log is tight against the corner of the bend in the
burner. (The flat side of the logset faces to back of the stove.)
Centre the log to the burner. When properly positioned, the
knot should be located on the top left corner of the log. Refer
to Figures 9 & 10 for further details.
Figure: 9 - Side view of burner illustrating the proper log placement.
WARNING:
Dangerous Operating Conditions May Occur If The Logs Are Not Positioned In The
Approved Positions Indicated Below.
Read The Following Instructions Carefully And To Completion. Refer To The
Diagrams When Appropriate. If The Logs Are Broken Or Otherwise Damaged,
Do Not Use This Appliance Until They Have Been Replaced. Broken Logs Can
Interfere With The Pilot Operation And May Cause An Explosion.
