32
3
© 2017 KOSTAL Solar Electric GmbH
Installation
3.3 Installation
Selecting the installation site
Protect inverter against exposure to
direct sunlight.
Protect inverter from rain and splash
water.
Protect inverter from falling parts which
could enter the inverter's ventilation
openings.
NH
3
Protect the inverter against dust,
contamination and ammonia gases.
Rooms and areas containing livestock
are not permitted as installation sites.
3000 m
Inverter may only be installed up to an
altitude of 3000 m.
(
Derating as of 2000 m
)
-25...60 °C
-13...140 °F
The ambient temperature must be
between -25 °C and +60 °C.
4...100 %
The air humidity must be between 4 %
and 100 % (condensing).
90°
200
200
100
Maintain minimum distances to other
inverters and the necessary clearance.
IMPORTANT
INFORMATION
Observe these instructions when
selecting the installation site.
Guarantee claims may be restricted
or become entirely null and void in
the event of failure to observe.
This device is classified as
equipment class A. It may
therefore cause radio interference
in a domestic environment. If
this occurs, the operator may
be required to take appropriate
measures.
DAMAGE POSSIBLE
Falling parts that enter the fan
through the inverter's cooling ribs
may block the fan. Insufficient
cooling of the inverter may result
in output reduction or the failure of
the system.
To provide protection against
falling parts, an optional acces-
sory (cover plate) that covers the
cooling ribs but still allows cooling,
can be ordered from your service
partner or a specialist shop.
There must be a free space of
320 mm above the inverter to fit the
optional accessory.
2
3
4
6
7
8
9
10
11
1
5
