120
8
© 2017 KOSTAL Solar Electric GmbH
Maintenance
When the country setting of the inverter is updated by
the manufacturer, this can be updated with the "Country
Settings Tool". In the process, the country settings and
parameters of the country currently set, will be adjusted
as necessary.
If an update is available, you will find this on the
manufacturer's website in the download area under
Service. A password may be needed in various countries
in order to activate the new parameters. The password
can be acquired from the Service team.
Procedure
1.
Download the current "Country Settings Tool" from
the manufacturer's website.
2.
Go to the folder with the downloaded ZIP file.
3.
Extract the ZIP file.
P
The files are extracted into a separate folder.
4.
If the inverter is not yet connected with a PC via LAN,
connect this with the inverter now using a LAN cable.
5.
Start the update by double-clicking on the *.exe file
and follow the instructions on the PC.
Choose the desired setting in the application and
confirm with "Activate". Please note that the country
settings must have been set correctly on the inverter
in advance.
DANGER
RISK OF DEATH DUE TO ELECTRI-
CAL SHOCK AND DISCHARGE!
Always de-energise the device
during installation and before
maintenance and repairs, and
secure it against being switched
back on.
Ch. 4.3 Important! After de-ener-
gising the device, wait five minutes
for the capacitors to discharge.
8.5 Update software (country settings)
2
3
4
6
7
8
9
10
11
1
5
