Korenix JetNet 4500 Series, Руководство пользователя

Страница: 24 / 69

Korenix JetNet 4500 Series Industrial Managed Ethernet Rail Switch User’s Manual 3-6
Port Control
You can change the port settings here.
Simply select the port you want to configure and you will be able to view the current status and
settings of the selected port, and make changes to port settings as required.
In
State
column, you can enable or disable the control over this port.
In
Negotiation
column, you can configure the auto negotiation mode to
Auto
to enable
automatic negotiation, or Force (to directly specify the speed/duplex on this port).
In
Speed
column, you can configure the speed of this port. The command is only available when
you selected Force mode.
In
Duplex
column, you can configure the full-duplex or half-duplex mode of this port. The
command is only available when you selected Force mode.
In
Flow Control
column, “Symmetric” means that you need to activate the flow control function
of the remote network device in order to let the flow control of that corresponding port on the
JetNet to work. “Asymmetric” means that you don’t need to activate the flow control function of
the remote network device, as the flow control of that corresponding port on the JetNet will work
anyway.
Once you finish configuring the settings, click on
Apply
to save the configuration.
Note:
Remember to click on the
Save Configuration
button to save your settings. Otherwise,
the settings you made will be lost when the JetNet is powered off.
Switch Settings