Korenix JetNet 4500 Series, Руководство пользователя

Страница: 23 / 69

Korenix JetNet Series Industrial Managed Ethernet Rail Switch User’s Manual 3-5
Disabled
.
Negotiation
: “Auto” means that the switch will auto-negotiate the speed (automatically select
10M or 100M bps), and the transmission mode (full or half duplex), with the remote device. Force
means that the switch will run according to your own forced settings for speed and duplex.
Speed/Duplex
: Indicates the port speed.
Config
column shows the configuration set up by
users. The
Actual
column shows the actual speed of the port.
Flow Control
: Configured and Actual – “Symmetric” specifies that you need to activate the flow
control function of the remote network device in order to let the flow control of that corresponding
port of the switch to work. “Asymmetric” indicates that you don’t need to activate the flow control
function of the remote network device. The flow control of that corresponding port on the switch
will work anyway.
Single Port Status
To get the single port status screen, you can click directly on any port number displayed at left to
see port-specific information for that port and similar to that listed below:
Port Statistics
In this section, you can view operation statistics for each port. Click on
Clear
to reinitialize and
clear any counts.