Konica Minolta BIZHUB C450P, Руководство пользователя

Страница: 54 / 404

1 Installation and operation precautions
1-34 C450P
Automatically canceling the settings (automatic panel reset)
If no operation is performed for a specified length of time while settings are
being changed, settings that have not been programmed are cleared and re-
turn to their default settings.
This is the automatic panel reset operation.
As the factory default, the automatic panel reset operation is performed after
1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed
and whether or not it is performed can be set from the Utility mode. For
details, refer to “User Setting” on page 4-24.
Automatically conserving energy (Low Power mode)
If no operation is performed for a specified length of time, the control panel
goes off and the machine automatically enters a mode where it conserves
energy.
This is the Low Power mode.
The machine can receive jobs even while it is in Low Power mode.
As the factory default, the machine enters Low Power mode after 10 minutes.
To recover from Low Power mode
When a print job is received, the machine recovers from Low Power mode
and begins printing after it has finished warming up (within 30 seconds at
normal room temperature (23 °C)).
2
Note
The Low Power mode can also be canceled by pressing any key in the
control panel.
!
Detail
The length of time until the machine enters Low Power mode can be
changed. For details, refer to “User Setting” on page 4-24.