Komatsu PC118MR-8, Руководство по эксплуатации и обслуживанию

Страница: 165 / 418

FUNCTIONING
CAB
3-81
4) Turn the lock (2) 90° clockwise into the LOCK (L)
position and fasten the windscreen upper part.
NOTICE
After completing the above operation, check that the
windscreen is securely fastened and cannot move. The
windscreen may fall if not secured correctly.
4) To refit the lower windscreen, repeat the above
procedure in reverse order.
SLIDING DOOR 3
WARNING
q
Make sure that the sliding door is locked in the correct
position both when open and when closed.
q
Always stop the machine on a level surface when it is
necessary to open or close the door.

If the door is opened or c losed on a slope , the
operating effort may change suddenly. Do not open or
close the door on slopes.
q
Always use the handle (1) and the knob (2) to open or
close the door.
q
Be careful to your hands, in order to prevent them
from being caught between the door and the front or
centre pillar.
q
If there is anyone inside the cab, warn him/her before
opening or closing the door.
NOTICE
Always clean the step to access the cab. Possible mud or
ice accumulation can prevent opening the sliding door.
Lock 3
When closing the door, pull the handle (1) backward to release
the lock (3), then pull the door forward.
WEAM014802