Komatsu D51EX-24, Руководство по эксплуатации и техническому обслуживанию

Страница: 185 / 382

NOTICE
• Do not add the DEF more than the line F of the sight gauge (3). DEF may leak through the breather.
When the ambient temperature is low, if DEF freezes, it expands and may leak or break devices.
When DEF may freeze, do not add it more than line (7) of sight gauge (3).
Be careful of the DEF line when performing operations on a slope or traveling on a rough ground.
When the remaining DEF level is low, DEF pump may suck the air, or the warning may appear due to
the sudden drop of DEF level, or inducement may be actuated.
• If DEF is stored in another container, foreign material may be mixed in it and toxic gas or corrosive
substance may be produced by chemical reactions. When adding DEF, do not transfer it to another
container.
• If you use a funnel to add DEF, the strainer which is set at the filler port may be broken. Do not use a
funnel.
• When using a portable refill container, use it up each time. If any of it is left, completely seal it up.
Remove foreign material, if there is any.
• Do not wash the supply nozzle in city water. Minerals may clog the devices.
• Do not dilute DEF with water.
• If you add fluid other than DEF (diesel fuel, low concentration DEF, etc.) by mistake, the caution
lamp lights up and the alarm buzzer sounds to warn the abnormality. In this case, ask your Komatsu
distributor for draining of the wrong fluid and inspection. DEF injector and/or DEF pump may need
to be replaced.
1.
Turn the starting switch to ON position (B).
2.
Check the DEF level gauge on the machine monitor.
3.
After checking, turn the starting switch back to OFF posi-
tion (A).
4.
Check that the engine is stopped.
5.
If DEF is insufficient, add it.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-129