Regulatory Information
4/13/2012
Kollmorgen
58
S200 Position Node Installation Guide
* (cable between filter and drive shielded with shield tied to PE with a 360 degree termination at each end of
the cable)
1)
S200 AC DRIVE:
S20360-VTS
2)
MOTOR FEEDBACK CABLE:
CF-DA0111N-05-0
(CF-DA0111N-50-0 for conducted emissions)
3)
MOTOR POWER CABLE:
CP-102AAAN-05-0
(CP-102AAAN-50-0 for conducted emissions)
4)
MOTOR:
KOLLMORGEN AKM43K-ANCNC-00
5)
LINE FILTER:
MTE RF30006-4 (see * below)
6) CORDS FOR AC MAINS CONNECTION
7) 5V POWER SUPPLY FOR ENABLE OPTO
8) PERSONAL COMPUTER
9) SERIAL CABLE (for setup and diagnostics)
10) SHIELDED I/O CABLE WITH DSUB SHELL GROUNDED AT EACH END
B.3.2 CE
Test
Setup
(DC MODELS S2XX3X-VTS)
1
2
3
4
5
6
7
8
9
10
6
6
1)
S200 DC DRIVE:
S20630-VTS
2)
MOTOR FEEDBACK CABLE:
CF-DA0111N-05-0
(CF-DA0111N-50-0 for conducted emissions)
3)
MOTOR POWER CABLE:
CP-102AAAN-05-0
(CP-102AAAN-50-0 for conducted emissions)
4)
MOTOR:
KOLLMORGEN AKM43K-ANCNC-00
5) SAFETY ISOLATED DC BUS POWER SUPPLY
6) CORDS FOR AC MAINS CONNECTION
7) 5V POWER SUPPLY FOR ENABLE OPTO
8) PERSONAL COMPUTER
9) SERIAL CABLE (for setup and diagnostics)
10) SHIELDED I/O CABLE WITH DSUB SHELL GROUNDED AT EACH END
B.3.3 Declaration
of
Conformity
In our Declaration of Conformity, we affirm our compliance with Directive 73/23/EEC (Low voltage Directive) and
with Directive 89/336/EEC (EMC Directive).
For the S20260-VTS, S20360-VTS, S20330-VTS, and S20630-VTS, EMC testing was done according to
EN61800-3:1997 with the incorporation of amendment A11:2000 (Emission limits according to chapter 6.3.1 of
that regulation, First environment / restricted distribution).
During assembly of our product in a machine, startup (that is, normal operation) is prohibited until the end-product
complies with Directive 89/392/EEC (Machine Directive) and directive 89/336/EEC (EMC Directive).
The machine manufacturer must prove that the complete system conforms with all relevant European Directives.
Drive conformance to specified standards is certified by the Declaration of Conformity in this manual.
