Kohler PowerWAVE 8000DPA RI (S2) Series, Руководство пользователя, Страница: 6 / 88

II
TS_616_08 PW8000DPA ST (S2) UK User Manual 21/4/22
Installation 46
4.1 Introduction 46
4.2 Taking receipt of the UPS 46
4.2.1 Reporting transportation damage 46
4.2.2 Local transportation 47
4.2.3 Storage 47
4.3 Unpacking 48
4.3.1 Removing the standard UPS packaging (cardboard container) 48
4.3.2 Removing the alternative wooden crate packaging 49
4.3.3 Batteries 49
4.4 Power cabling 50
4.4.1 Safety notes 50
4.4.2 Power connections 50
4.4.3 Connecting the power cables (single-feed input) 53
4.4.4 Connecting the power cables (dual-feed input) 53
4.4.5 Connecting the UPS output cables 53
4.4.6 Connecting the battery 54
4.5 Remote monitoring and control facilities 55
4.5.1 PW8000DPA ST communications interface 55
4.6 Installation completion 55
Operation 56
5.1 Introduction 56
5.1.1 Operating procedure summary 56
5.1.2 General warnings 56
5.2 How to start the UPS system from a fully powered-down condition 58
5.3 Operating in ECO (on bypass) mode 60
5.3.1 How to power-up the UPS system and operate in ECO (on bypass) mode 60
5.3.2 How to transfer to ECO (on bypass) from on-line (on inverter) mode 60
5.3.3 How to transfer to on-line (on inverter) from ECO (on bypass) mode 61
5.3.4 How to Turn OFF the UPS system when operating in ECO (on bypass) mode 61
5.4 How to transfer the load to the maintenance bypass 62
5.5 How to shut down the complete UPS system 64
Maintenance 65
6.1 Introduction 65
6.2 User responsibilities 65
6.3 Battery testing 66
Troubleshooting 67
7.1 Alarms 67
7.2 Module control panel 67
7.3 Troubleshooting table 68
7.4 Contacting service 68
Options 69
8.1 Customer communications 69
8.1.1 Customer control inputs (X1) 70
8.1.2 Dry port outputs (X2) 72
8.1.3 Serial RS232 Computer interface – USB & JD1 (Smart Port) 72
8.1.4 Network interface card slots 73
8.2 UPS Monitoring and automated control software 74
8.2.1 The importance of UPS management 74
8.2.2 SNMP monitoring software 74