Kohler K-3363, Руководство пользователя

Страница: 104 / 220

1. Install the Pit (Optional)
Concrete Pit Installation
Use a concrete pit installation when a low outside threshold is either required or desired.
The finished floor must be no more than 1/2
″
(1.3 cm) below the top of the outside threshold. For
the easiest wheelchair entry and exit, the finished floor should be flush with the outside threshold of
the module.
A typical tile installation will require a 3/4
″
(1.9 cm) minimum pit into the subfloor.
Make sure the subfloor is flat and level.
Wood-Framed Sunken Installation
Framing must be similar to the framing used in a stairwell.
The designer or architect should specify the quantity and size of the reinforcing joists and headers.
Size the joists, subflooring, underlayment, and floor covering to make the finished floor flush with
the module threshold height
or
a maximum of 1/2
″
(1.3 cm) below the module threshold height.
Make sure the subfloor is flat and level.
Wheelchair Ramp Alternative
Build a wheelchair ramp above the subfloor up to the outside threshold of the module.
Make sure the subfloor is flat and level.
2" (5.1 cm)
to 3-1/4"
(8.3 cm)
3-1/4"
(8.3 cm)
Tile or Floor
Covering
2" (5.1 cm)
to 3-1/4"
(8.3 cm)
Tile or Floor
Covering
2" (5.1 cm)
to 3-1/4"
(8.3 cm)
Tile or Floor
Covering
Concrete
Underlayment
Subfloor
Floor Joists
Ramp
Subfloor
Module Threshold
Module Threshold
Module Threshold
Concrete Wood-Framed Wheelchair Ramp
1030529-2-B 8 Kohler Co.
Spec Seq#: 102
31928