Kohler K-3363, Руководство пользователя

Страница: 79 / 220

Renewing "XT" Quaturn ™ or Slow Compression Cartridges
4
STEP 1 - Turn off water at stop
or main valve. Remove handle
assembly and with flat face
wrench, remove cap nut (A).
STEP 2 - Remove cartridge
from faucet. Flush out any rust
or chips that may be in body.
DO NOT use file or abrasives to
clean out body.
STEP 3 - Unscrew stem nut (K)
at the bottom of the cartridge
with a flat wrench using a handle
as lever to assist removal.
STEP 4 - Turn sleeve (D) off
stem (C) by holding handle and
turn sleeve by hand. As sleeve
is removed from stem, seat (F)
O-Ring (G) seat washer (H)
retainer (I) and washer (J) will be
forced off the stem.
STEP 5 - Reassemble sleeve
(D) on lightly lubricated stem (C).
With new parts add seat (F)
O-Ring (G) seat washer (H)
retainer (I) and washer (J) on
stem (C) and screw nut tightly
on stem.
STEP 6 - Reposition washer
and O-Ring (B) on stem (C) add
to sleeve (D). Replace cartridge
in faucet.
STEP 7 - Replace Cap Nut (A)
and partially tighten. Replace
handle and rotate cartridge in
the direction of closing until the
cartridge is in the desired position
for convenient operation. Remove
handle. Lock cartridge in place
by securely tightening Cap Nut
(A) to 20 - 27 ft. lbs torque.
STEP 8 - Turn water on at main
valve or stop. Remove aerator.
Turn faucet on to “full” allowing
sediment to flush from lines and
replace aerator cartridge.
“XT” TYPE CARTRIDGES
PARTS LIST - Those parts listed in the “Description” column below that are marked with an asterisk (*) are parts that are
recommended for replacement when renewing these operating cartridges. Other parts not marked may require replacement
depending on the amount of wear they have received and their condition when examined.
Quaturn Cartridges Slow Compression Cartridges
Exposed Cap Concealed Cap Exposed Cap Concealed Cap
Description 1-009XTJKNF 1-100XTJKNF 377-XTRHJKNF 377-XTLHJKNF 217-XTLHJKNF 217-XTRHJKNF 274-XTLHJKNF 274-XTRHJKNF
A. Cap 1-214JKCP 1-214JKCP 274-004JKRBF 274-004JKRBF 1-214JKCP 1-214JKCP 274-004JKRBF 274-004JKRBF
B. Packing Assembly
*
93-131JKNF 93-131JKNF 93-131JKNF 93-131JKNF 93-131JKNF 93-131JKNF 93-131JKNF 93-131JKNF
C. Stem Assy. w/ O-Ring 1-311KJKBNF 1-310KJKBNF 274-110KJKBNF 274-111KJKBNF 1-314KJKBNF 1-315KJKBNF 274-112KJKBNF 274-115KJKBNF
D. Sleeve 2-329JKRBF 2-328JKRBF 2-329JKRBF 2-328JKRBF 317-102JKRBF 317-103JKRBF 317-102JKRBF 317-103JKRBF
E. O-Ring 2-043JKNF 2-043JKNF 2-043JKNF 2-043JKNF 2-043JKNF 2-043JKNF 2-043JKNF 2-043JKNF
F. Seat
*
1-327JKNF 1-327JKNF 1-327JKNF 1-327JKNF 1-327JKNF 1-327JKNF 1-327JKNF 1-327JKNF
G. O-Ring 1-328JKNF 1-328JKNF 1-328JKNF 1-328JKNF 1-328JKNF 1-328JKNF 1-328JKNF 1-328JKNF
H. Seat Washer
*
1-021JKNF 1-021JKNF 1-021JKNF 1-021JKNF 1-021JKNF 1-021JKNF 1-021JKNF 1-021JKNF
I. Retainer 1-022JKNF 1-022JKNF 1-022JKNF 1-022JKNF 1-022JKNF 1-022JKNF 1-022JKNF 1-022JKNF
J. Washer 1-031JKNF 1-031JKNF 1-031JKNF 1-031JKNF 1-031JKNF 1-031JKNF 1-031JKNF 1-031JKNF
K. Nut 333-097JKNF 333-097JKNF 333-097JKNF 333-097JKNF 333-097JKNF 333-097JKNF 333-097JKNF 333-097JKNF
A
B
C
D
E
F
G
H
I
J
K
Spec Seq#: 98
361769