Kohler K-3363, Руководство пользователя

Страница: 148 / 220

Required Accessories
(For K-T12007, K-T12014, and K-T12021 Only)
K-304-* Rite-Temp
®
valve
OR
❑
NA
K-2971-KS HiFlow Rite-Temp valve with stops
❑
NA
* For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification Sheet or Roughing-In sheet.
Optional Accessories
K-12002 Plug Button Set
❑
Other___
88526 HiFlow Rite-Temp Thin Wall Installation Kit
❑
CP
❑
PB
❑
Other___
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage.
Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7
″
(178 mm) to 18
″
(457
mm) with single elbow between valve and wall-mount spout.
1/2" NPT
5-1/2"
(140 mm)
72" (1829 mm) -
78" (1981 mm)
to Floor (Typical)
Ø 6-1/2" (165 mm)
1/2" Cold
48" (1219 mm)
to Floor
(Shower Only)
10" (254 mm)
to Spout
(Bath Only)
4" (102 mm) to
Top of Rim
4-7/8" (124 mm)
4" (102 mm)
W/O Stops
1/2" Hot
5-5/8"
(143 mm)
1/2"-14 NPT or
5/8" ID for 1/2" NOM
Copper Tubing
2-3/4" (70 mm)
Thin Wall
2-3/4" (70 mm) - 3-1/2"
(89 mm) Thick Wall
For slip-fit spout, 5/8" OD tube must
extend 1-1/2" (38 mm) min to 2-7/8"
(73 mm) max beyond the finished wall.
For 1/2" NPT spout, pipe must extend
3-3/4" (95 mm) beyond the finished wall.
Product Diagram
FAIRFAX
®
FAIRFAX
®
BATH & SHOWER TRIM SET
Page 2 of 2
1031258-4-
C
Spec Seq#: 107
6119